Looking for 10.5 and 12.5 mm drill bits

[F6maniac]

Anybody have a source for high quality 10.5 mm and 12.5 mm bits? I'm not interested in China or Taiwan made bits.

Thanks in advance.

 

[terry q]

http://www.amazon.com/Metric-Magnum...122006&sr=1-10&keywords=10.5mm+drill+bit,+usa


http://www.amazon.com/Metric-Magnum...0122109&sr=8-5&keywords=12.5mm+drill+bit,+usa

 

[vtgaryw]

I usually just got to McMaster-Carr for things like that:

McMaster-Carr

Not always the cheapest, but quality is always good and they are the most reliable supplier you'll ever find.

-gary

 

[mredburn]

Viking drill bits are made in USA and they also make the Norseman line of drill bits.

 

[NittanyLion]

You can easily use 27/64" and 1/2". I like to use these when painting tubes and the insides of blanks. Both are about .2" larger.

 

[Jim Burr]

PSI and CSUSA both have them...where have you looked so far?

 

[Silverado]

Mechanics bits and tools, excellent bits USA Made

 

[F6maniac]

PSI and CSUSA both have them...where have you looked so far?

They only sell chinese bits in those sizes. I already have those and won't buy anymore.

I see Viking has the bits in 5 packs. I'll see if I can find out who sells those.

 

[F6maniac]

You can easily use 27/64" and 1/2". I like to use these when painting tubes and the insides of blanks. Both are about .2" larger.

I'm guessing you meant .02" over. I'll give that a try also. Thanks

 

[F6maniac]

I usually just got to McMaster-Carr for things like that:

McMaster-Carr

Not always the cheapest, but quality is always good and they are the most reliable supplier you'll ever find.

-gary

I see they have the sizes I'm looking for in parabolic bits. I'd like to know where they are made though.

May be worth a try. I'd like the parabolic flute vs the jobber bits. Thanks!

 

[F6maniac]

http://www.amazon.com/Metric-Magnum...122006&sr=1-10&keywords=10.5mm+drill+bit,+usa


Amazon.com: CTD Metric Magnum Super Premium 12.5mm Drill Bit (2 Pack): Automotive

Dang, I thought I had checked Amazon. Thanks

 

[NittanyLion]

You can easily use 27/64" and 1/2". I like to use these when painting tubes and the insides of blanks. Both are about .2" larger.

I'm guessing you meant .02" over. I'll give that a try also. Thanks

Sorry about that....meant to say .2mm which is about .01".

 

[F6maniac]

You can easily use 27/64" and 1/2". I like to use these when painting tubes and the insides of blanks. Both are about .2" larger.

I'm guessing you meant .02" over. I'll give that a try also. Thanks

Sorry about that....meant to say .2mm which is about .01".

Thanks Steve, that sounds even better. I'll give those sizes a try before buying anymore bits. I paint all tubes and hole except for wood and some Tru-stone.

 

[dtswebb]

Check with Arizona Silhouette. Barry stocks Norseman drill bits in 10.5 and 12.5 mm.

 

[vtgaryw]

In a former life, a day never went by we didn't place at least one order from McMaster. Never had a poor quality cutting bit of any type.

They zealously guard their sources, though, so you'd have a hard time getting them to tell you where a given product came from.

-gary

I usually just got to McMaster-Carr for things like that:

McMaster-Carr

Not always the cheapest, but quality is always good and they are the most reliable supplier you'll ever find.

-gary

I see they have the sizes I'm looking for in parabolic bits. I'd like to know where they are made though.

May be worth a try. I'd like the parabolic flute vs the jobber bits. Thanks!

 

[Swagopenturner]

Fuller Drill bits sells direct and are USA made. I think they also have parabolic in ANY size you may want. Definately not the cheapest, they may be the most expensive!

 

[Rockytime]

You can easily use 27/64" and 1/2". I like to use these when painting tubes and the insides of blanks. Both are about .2" larger.

I'm guessing you meant .02" over. I'll give that a try also. Thanks

Maybe .002"?

 

[keymaster61]

hi try quey fixings on ebay I know they are a uk company but if you contact them they sell de walt long fantasticgreat service (better had be it's my daughter)

 

[Joey-Nieves]

I like victor machinery:
Victor Machinery Exchange Inc.'s Alphabetical Index