Have a lot to learn

Signed-In Members Don't See This Ad
OKLAHOMAN

OKLAHOMAN

Member
Joined
May 17, 2006
Messages
10,228
Location
Costa Rica
My first attempt into the component less world. Have about 4 hours in this off and on and still need to make the section (waiting on tap and die set fro section to body) Lots of room and I do mean lots for improvement. I already know some things to do different. Don't think I've enjoyed the shop this much in ages. Normally in 4 hours I have 15 to 20 pens done getting ready for a show. It's red Benoite and post able. Heres a quick two photos...

1-IMG_3446.jpg


waiting for section:
1-IMG_3448.jpg
 
Signed-In Members Don't See This Ad
Looks nice for the first attempt. The front section will definately add something to it. I'm still working on shining the threads myself.
 
You're on your way! You know, a couple years ago I posted that I was going to start making "kitless" pens because the time in the shop making my own creations was so much more enjoyable. I"m glad to see I'm not the only one! Can't wait to see the finished pen.

I like that red Benoite material, does it turn like Ebonite, it looks similar! :tongue:
 
Super job! Looks great!

Now I cant wait to get my taps/dies in. Ups says Wednesday on a few. I still have a few more to get.

That said, Where can I find a centering bit? What is it really called?
 
Nice pen, Roy! Clean lines.

AND.... Will Classic Nibs be the sole supplier of this "impossible to find- Benoite"? :)

Seriously, very nice first effort!
 
Dustygoose said:
Super job! Looks great!

Now I cant wait to get my taps/dies in. Ups says Wednesday on a few. I still have a few more to get.

That said, Where can I find a centering bit? What is it really called?
Click to expand...

I've been looking, as well. From what I understand, what we really are looking for is called a spotting bit.

Everything we never wanted to know about drill bits can be found here: Drill bit - Wikipedia, the free encyclopedia
However, the important part is in the section labeled Center and Spotting Drill Bits.

Tomas
 
I JUST KNEW IT! Once you got started, you would come in with both guns blazing. :biggrin: Great start Roy. BTW, my grand daughter is engaged to an exchange student from Hermany. Where should I send him to look for some of this Benoite? :rolleyes::biggrin:
 
OK Roy...You are HOOKED!!! Jeez..If that's your first one...You are learning FAST!!! Gorgeous! Love the profile and exposed clip. I can't wait to see the finished pen!!! I love that ucmberland :biggrin:!! and Roy..Happy Father's Day !! Say Hi to Dee!! Regards, Doc:smile:
 
Excellent pen Roy!! Your off to a good start on this one. I love the shape, the clip, not so much. I see room for improvement, but i think this is a great start. Guess who will be doing a kitless demo at the meeting next week :)

PS: I also love this color of ucmberland Benoite:biggrin: ....You and doc must get your material from the same place:tongue::biggrin:
 
Last edited:
Roy, it looks like you've got less to learn than you think. I like the shape and the proportions are terrific. I can take or leave the clip, it looks heavy on the pen, and seems to take away from the balance of the proprtions.

Mike
 
Roy, that looks really good. Sounds like you work fast too! Are you waiting for the 9mm die? I had to wait a while for mine too, they keep selling out, I wonder why they are in such high demand?
 
Last edited:
Thanks to all who commented, I agree on the clip it is a little big for the penI think the cap and body proportions are within reason, maybe because of the clip it looks like the cal could be about an 1/16 inch longer. I think I'll leave it as is to remind me. Jeremy my first one can't come close to your first one and yes waiting for the 9MMx.75, if I find a source I just might handel them on Classics.
 
OKLAHOMAN said:
Thanks to all who commented, I agree on the clip it is a little big for the penI think the cap and body proportions are within reason, maybe because of the clip it looks like the cal could be about an 1/16 inch longer. I think I'll leave it as is to remind me. Jeremy my first one can't come close to your first one and yes waiting for the 9MMx.75, if I find a source I just might handel them on Classics.
Click to expand...

For 9mm, I 've been using 9 x 1mm. Bought it here:

Amazon.com: Vermont American 21138 9MM-1.00 High Carbon Steel Metric Plug Tap: Home Improvement
 
Great job Roy!

I'm only waiting on my collet set (been on back order for over a month now, it will hopefully ship this week!). I have received all the other tools I need.

The real question though ... Will these 'kitless' (or is that componentless) pens have a place on your table at one of your shows?

FYI Indy still has 3 sets of M9.75 in stock [here] (The die are 1-1/2" diameter). These are becoming scarce.

AK
 
Last edited:
I contacted Mike and Linda on Saturday and one is on its way now, thanks.
To answer your question if these will find their way on my table at my shows, in short no, I did an experiment last year at them with a few from a member here and the results were in a word..BLING or to put it in an other way NOT BLINGY ENOUGH.
Now at "Pen Shows" these would do better than our component sets, your selling to two completely different groups of people. Another reason they won't be on my "Art Show Tables" is that I'm going to cut down on shows this year to just 3 and next year none:biggrin:. But I might be attending some "Pen Shows":wink:

4quote=Andrew_K99;1410859]Great job Roy!

I'm only waiting on my collet set (been on back order for over a month now, it will hopefully ship this week!). I have received all the other tools I need.

The real question though ... Will these 'kitless' (or is that componentless) pens have a place on your table at one of your shows?

FYI Indy still has 3 sets of M9.75 in stock [here] (The die are 1-1/2" diameter). These are becoming scarce.

AK[/quote]
 
You must log in or register to reply here.
Back
Top Bottom