...do you use CA, or epoxy? It seems that to do that many levels (unless you take a looong time between each piece) would require CA, but I'm afraid that if I used CA, the router would eventually "catch" and knock off the piece being glued.
.. and here-in lies the trick:wink:
My reason for the bulky butt ugly blank is so that the glue joints offer more resistance to seperating than a smaller neatly made blank.
I learnt that trick from a Big Bird from South Carolina:wink:
He used to wrap gauze or even paper around fragile blanks and use liters of CA to re-inforce the
outside surfaces. Now the inside can be drilled ( or routered ). Of course, once the tube is glued in it re-inforces from the inside and the outside can now be turned.
I started off using the 'best' brand name CA I could find.
Now I use this cheap no name contractor brand that is sold for mitre joints. It is pretty thick and I use it for everything....Stainless, wood, plastic, aluminium, brass etc etc. I use it for a finish too.
I use it in my shop which is unheated and is .....freezing at the moment.
No issues.
Their 'Super-Glue' version is much thinner and I use it if I need it to stabilize porous wood as I turn.
Edit in; Randall, it's brass shim. CA finish to stop it tarnishing