BassBlaster
Member
So, I think I have this casting snakeskin thing down. Now I just need to figure out how to turn them. More specificly, how to mount them on the lathe. I have tried using the mandrel and tried between centers, both gave the same result. The PR is seperating from the skin. I believe the reason is from bushings putting pressure on the resin. Today, I went through a process of making sure everything was perfectly square with my end sanding process using a digital angle box so I could rule out unsquared ends. When mounting on the lathe, I'm only using enough pressure to keep the blank from spinning so its not from excessive pressure. Any suggestions? I need some help.
I'm considering just mounting up my bushings and sanding the inside edges back just enough that they are only putting pressure on the brass tube but I dunno if that will help or not.
I am also willing to send someone that casts and turns these regularly, one of my blanks just to rule out a casting issue, allthough, I really feel like its not a casting issue. I have followed everyone heres tutorials and advice perfectly and they look perfect when they come out of the mold.
I should also mention, the blank I attempted today was cast at least 3 weeks ago so its not an issue with the resin not being cure.
Please give me your thoughts. I can post a pic if need be, but everyone has seen resin seperate and knows what I'm talking about.
I'm considering just mounting up my bushings and sanding the inside edges back just enough that they are only putting pressure on the brass tube but I dunno if that will help or not.
I am also willing to send someone that casts and turns these regularly, one of my blanks just to rule out a casting issue, allthough, I really feel like its not a casting issue. I have followed everyone heres tutorials and advice perfectly and they look perfect when they come out of the mold.
I should also mention, the blank I attempted today was cast at least 3 weeks ago so its not an issue with the resin not being cure.
Please give me your thoughts. I can post a pic if need be, but everyone has seen resin seperate and knows what I'm talking about.