jwoodwright
Member
Thanks to Eaglesc, I have modified my press per a past conversation. His Idea of the step was used, kept trying to hold the step and the pen and....
So... First the New and Improved Rough Prototype... Using a Turret to aid in different length parts to be pressed. The turret is held with a 1/4 - 20 screw, tapped into the Corian Base... Easily moves from one position to another...
Grizzly sold these presses, some left the sticker on, it's a paper punch, put a die in it, go through 50 sheets...
First Photo New Prototype, second Photo The Old Prototype and Arbor Press...
So... First the New and Improved Rough Prototype... Using a Turret to aid in different length parts to be pressed. The turret is held with a 1/4 - 20 screw, tapped into the Corian Base... Easily moves from one position to another...
Grizzly sold these presses, some left the sticker on, it's a paper punch, put a die in it, go through 50 sheets...
First Photo New Prototype, second Photo The Old Prototype and Arbor Press...