pensmyth
Member
I have for sale a Proxxon mini table saw. It has a carbide blade in it. The blade gaurd is missing. I used it mainly for cutting segmented pieces. I'm asking $225.00 and that will include shipping in the US. below is the technical information on this saw. PM me if your interested.
Thanks,
Andy
Ideal for straight, miter, and compound cuts, this saw will tackle hard and soft woods, non-ferrous metals, plastics, rubber, and cork. Even your smallest cut will be clean – ready for use. A miter gauge and fence allows from 0-90° cuts. While the machined aluminum work table is large, it can be expanded by pulling out the extension on the left side to accommodate longer work pieces bringing it to a full 19-5/8" width. The quiet DC motor and belt drive produce high torque. When coupled with electronic speed control, even delicate materials can be cut without overloading the unit. It can be attached to a vacuum for a dust free work area too. The retractable blade guard can be replaced with the dado head for cutting slots in drawers and picture frames to a maximum of 5/16" (8 mm). A 3-11/32" x 1/64" (85 X .5mm ) 24 T blade (PX-8734) comes as standard equipment. Made in Japan.
Proxxon Table Saw Specifications:
Speed electronically variable from 4,400 to 6,800 rpm
Cutting Depth: 1/32" to 1" (1 - 22 mm), At 90°: 1", At 45°: 3/4"
Table: 11-1/2" x 9-1/2" (295 x 240 mm)
Overall Size: 11-1/2" x 10" x 7" (300 x 262 x 170 mm)
Volts: 110 - 120V AC, 60 Hz
Weight: 11.5 lb.
Thanks,
Andy
Ideal for straight, miter, and compound cuts, this saw will tackle hard and soft woods, non-ferrous metals, plastics, rubber, and cork. Even your smallest cut will be clean – ready for use. A miter gauge and fence allows from 0-90° cuts. While the machined aluminum work table is large, it can be expanded by pulling out the extension on the left side to accommodate longer work pieces bringing it to a full 19-5/8" width. The quiet DC motor and belt drive produce high torque. When coupled with electronic speed control, even delicate materials can be cut without overloading the unit. It can be attached to a vacuum for a dust free work area too. The retractable blade guard can be replaced with the dado head for cutting slots in drawers and picture frames to a maximum of 5/16" (8 mm). A 3-11/32" x 1/64" (85 X .5mm ) 24 T blade (PX-8734) comes as standard equipment. Made in Japan.
Proxxon Table Saw Specifications:
Speed electronically variable from 4,400 to 6,800 rpm
Cutting Depth: 1/32" to 1" (1 - 22 mm), At 90°: 1", At 45°: 3/4"
Table: 11-1/2" x 9-1/2" (295 x 240 mm)
Overall Size: 11-1/2" x 10" x 7" (300 x 262 x 170 mm)
Volts: 110 - 120V AC, 60 Hz
Weight: 11.5 lb.
Attachments
Last edited: