donstephan
Member
Plugging tubes must be so simple that there's no discussion in videos and instructions. Because I have a large quantity on hand, I tried DAP 33 window glazing compound. Made a layer about 3/16" thick, then about 5/16" thick. Plunged the end of the tube and carefully lifted out. Every time, the compound had pulled away slightly in one spot along the inside of the tube, regardless of whether the tube was simply pushed straight down or rotated slightly while being pushed down.
What works well, how thick, and could you describe the process slightly, including glitches and causes.
Kit instructions from Berea Hardwoods mentions "base wax" but I'm not familiar with the term.
Thanks.
What works well, how thick, and could you describe the process slightly, including glitches and causes.
Kit instructions from Berea Hardwoods mentions "base wax" but I'm not familiar with the term.
Thanks.