Well, I watched the Jet video about a dozen times and did quite well. However, I can't get the bearings off of the spindle (I removed the C-ring). I placed it in a vice with soft jaws and hit it with a rubber dead blow hammer, but it will not budge. I also applied some WD 40. No luck. Called Jet 3 x..they told me to keep trying.
Here's their video if it helps you help me (49 seconds in): http://www.jettools.com/us/en/community/videos/lathe-headstock-maintenance/
Thank you for reading and any advice.
Here's their video if it helps you help me (49 seconds in): http://www.jettools.com/us/en/community/videos/lathe-headstock-maintenance/
Thank you for reading and any advice.