Greetings from Saskatchewan Canada

Signed-In Members Don't See This Ad
C

Cypresssask

Member
Joined
Dec 26, 2011
Messages
1
Location
Waldheim, SK CANADA
I finally got around to joining at the encouragement of the member who sold me his penturning equipment and supplies this summer. I have been turning occasionally for a couple of years now but this should prove to be the catalyst to do a lot more. I had to finish my micro-shop (8x12) to fit everything in and get it heated so I haven't done any turning. Rather my 21 yr old son has been finding the time - will have to kick him out or get my other lathe stand completed so that we can both turn at the same time.

Have already been gleaning much information.

Cypresssask
 
Signed-In Members Don't See This Ad
ctubbs

ctubbs

Member
Joined
Sep 12, 2010
Messages
3,588
Location
Murray, Kentucky
Welcome Sam, from far west Kentucky, to the addiction, sometimes referred to as the vortex. You mention that you have read some of the site, be sure to give the library a good bit of time. The link is at the top of the page. You will find an article called Library Index. This covers tutorials on about anything pen making you can think of. You will also notice that there are articles listed by year. Much good info there as well. When these fail to answer your questions, by all means post it here. I have never seen one go unanswered very long. You might also want to give this thread a good look. It has some very good info for the beginning pen turner; http://content.penturners.org/library/general_reference/Getting_started_in_pen_turning.pdf. Grab some wood, make some shavings and have fun all the while being safe.
Charles
 
You must log in or register to reply here.
Previous Next
Top Bottom