With the larger kits, Jr. Gent. and larger (only 12.5 mm and larger), I have trouble controlling the "wobble" I get when drilling. I drill on the lathe and have used a center bit. Do I need to start with a center bit, then a large bit, then larger, then larger, until I get up to size?
It causes the barrel to not be perfectly straight all the way through and the tube is a very very tight fit on one end. What do I need to do to fix this?
Thanks
It causes the barrel to not be perfectly straight all the way through and the tube is a very very tight fit on one end. What do I need to do to fix this?
Thanks