Larry, I use 2 different sprays. The first is Tester Decal Bonder which is sprayed on the decal AFTER you have printed it and let dry. That will prevent the ink bleeding in the water and also adds a little strength to the decal. After that drys you soak the decal for 30-60 seconds, just enough time that it can slip on the backing. Don't wait to long or you will find your decal floating in the water and they are difficult sometimes to corral. Install the decal on your blank and let dry. Then spray the 2nd spray which is the clear acrylic spray, let it dry then apply you CA finish. What I said in my demo is I have read that some use the clear acrylic spray for both applications of spray. I don't know why it wouldn't work. I will try it when I run out of the decal bonder. Someone else here may comment that is what they do. Good luck!