Best way to fill open grain woods without CA

[reef12]

What is best way to fill open grain woods?

Without using CA.

Any suggestions on what is Local have a Woodcraft store

By open grain mean Rosewood Walnut etc.

thanks

 

[mrcook4570]

sanding sealer

 

[jeffj13]

If you are using a finish that sits on top of the wood, lacquer, poly, shellac, etc. you can fill the pores with that.

jeff

 

[reef12]

Originally posted by jeffj13
<br />If you are using a finish that sits on top of the wood, lacquer, poly, shellac, etc. you can fill the pores with that.

jeff

Okay using Crystal coat and Hut two part system.

Will try

 

[wdcav1952]

Originally posted by reef12
<br />

Originally posted by jeffj13
<br />If you are using a finish that sits on top of the wood, lacquer, poly, shellac, etc. you can fill the pores with that.

jeff

Okay using Crystal coat and Hut two part system.

Will try

Crystal Coat and the Hut polish will not last at all!

Go to Walmart or Lowe's and get Deft Sanding Sealer and Deft Gloss.

 

[bob393]

I have used Hut products for that purpose and they don't hold up.
Thanks for the Deft idea.

 

[Rifleman1776]

I use Myland's sanding sealer.

 

[RussFairfield]

Wet sand with either lacquer or shellac. Put the finish on and sand with 220 grit while it is still wet. The slurry will fill the grain. This is doing the same thing as a sanding sealer, the only difference is that the grain will be filled with fine wood dust rather than some foreign substance.

 

[woodbutcher]

I use mylands friction polish. It absorbs well and builds well. The down side is it takes at least a week to cure. I like to let it sit longer if possible. Also don't wax the finish for at least a week.
Jim

 

[Rifleman1776]

Originally posted by woodbutcher
<br />I use mylands friction polish. It absorbs well and builds well. The down side is it takes at least a week to cure. I like to let it sit longer if possible. Also don't wax the finish for at least a week.
Jim

I began using Myland's because it sets up almost instantly. [:0]

 

[Blind_Squirrel]

Originally posted by Rifleman1776
<br />I use Myland's sanding sealer.

Ditto. I love the stuff.