Tn-Steve
Member
Hey Gang,
I'm getting ready to do a Cambridge (Same bushings as the Churchhill / El Grande), and here's the rub..
I KNOW I should have checked the directions BEFORE I left the woodcraft shop that's only 70 miles from the house, but I figured that it would be more exciting this way. (Yea, that's my story, I'm sticking with it)
Thanks in advance
Steve
I'm getting ready to do a Cambridge (Same bushings as the Churchhill / El Grande), and here's the rub..
- Berea calls for a 33/64th bit (.5156 inch)
- AS calls for a 13.3mm Bit (.5236)
- The best I can find locally is 17/32nd (.5313 inch) (which would be 34/64ths)
- Berea .072 inches of wood at ends
- AS .064 inches of wood at ends
- Mine - .057 inches of wood at ends.
I KNOW I should have checked the directions BEFORE I left the woodcraft shop that's only 70 miles from the house, but I figured that it would be more exciting this way. (Yea, that's my story, I'm sticking with it)
Thanks in advance
Steve
Last edited: