Works in Progess - Lunar & Prints

Signed-In Members Don't See This Ad
Joined
Aug 7, 2009
Messages
700
Location
Jamestown, NC
I had a little bit of shop time and wanted to get a few ideas out of my head and onto some blanks. So this was the first batch of experiments that I was able to put together with the assistance of Mike (Russianwolf) and his casting skills. There are two different groups (prints & textured).

The prints consist of musical notes, Chinese characters, and script. The tubes are wrapped with a thin layer of polymer clay and then I applied a couple layers of inks and paints (and some gold and silver leaf) to the blank. There were several different techniques I was experimenting with as well as the inks and paints. The main thing was to see how everything reacted once baked and during casting. I think I need to work on some of the color variations as there were some changes with the heat of baking, but for the most part I was pretty happy.

The textured blanks (my daughter and I named them lunar since they glow in the dark) are also a thin layer of polymer with inks applied. The designs are actually raised (though it's hard to photo) and give the blank a nice 3D effect. I tried to add interest, but also wanted to keep the designs and colors subtle.

All in all I think it was a good first run. Any and all comments, recommendations, and feedback are welcome!
 

Attachments

  • lunar group.jpg
    lunar group.jpg
    93.5 KB · Views: 312
  • IMG_3991.JPG
    IMG_3991.JPG
    98.5 KB · Views: 236
  • blank lunar.jpg
    blank lunar.jpg
    95.3 KB · Views: 277
  • lunar blue.jpg
    lunar blue.jpg
    102.6 KB · Views: 254
  • IMG_3976.JPG
    IMG_3976.JPG
    146.7 KB · Views: 299
  • asian.jpg
    asian.jpg
    91.3 KB · Views: 275
  • asian pair.jpg
    asian pair.jpg
    108.8 KB · Views: 249
  • minstal pair.jpg
    minstal pair.jpg
    116.3 KB · Views: 205
  • manuscript pair.jpg
    manuscript pair.jpg
    115.7 KB · Views: 302
  • lunar green.jpg
    lunar green.jpg
    84.2 KB · Views: 242
  • manuscript.jpg
    manuscript.jpg
    84.9 KB · Views: 278
  • minstral 2.jpg
    minstral 2.jpg
    129.9 KB · Views: 263
Signed-In Members Don't See This Ad
Joined
Aug 7, 2009
Messages
700
Location
Jamestown, NC
That would be a question for Mike (Russianwolf). I have done some casting, but have always used the Resin Saver molds that have a plug incorporated into the cavities.

i just started casting. if you don't mind sharing, what do you use to plug the ends of your tubes and what are you casting in.(i.e. mold)

great casting by the way
 

edstreet

Member
Joined
Aug 12, 2007
Messages
3,684
Location
No longer confused....
????

I see you are going very very old school here.

As Plato said "Necessity... the mother of invention."

Casting items is a relative old practice and I am quite disappointed, shocked, dismayed and the like that this has not been done, before you and me that is. However now that the cat is out of the bag so to speak we can move this project from the 'top secret' category to public. :) This is the essence of innovation and kicking the bar up and allowing more creative areas to be molested by artist. Something that has been very long over due in the community.

By going this route the door to an incredible increase in potential markets is available which has been previous untapped and unobtainable.

attachment.php


I just sent this one to Toni about 2 months ago. It is a cast black rose euro
attachment.php
 

Attachments

  • IMG_8351.jpg
    IMG_8351.jpg
    155.6 KB · Views: 241
  • IMG_8369.jpg
    IMG_8369.jpg
    140.9 KB · Views: 231
  • IMG_8522.jpg
    IMG_8522.jpg
    60.6 KB · Views: 434
  • 1396772_10200953860510641_1335275315_o.jpg
    1396772_10200953860510641_1335275315_o.jpg
    152.6 KB · Views: 428
  • 1455033_10200944574038485_1715694693_n.jpg
    1455033_10200944574038485_1715694693_n.jpg
    115.3 KB · Views: 212
  • IMG_8376.jpg
    IMG_8376.jpg
    75.1 KB · Views: 195
Joined
Aug 7, 2009
Messages
700
Location
Jamestown, NC
Those look great! Toni's work will look great cast. Pat Lawson over at the Guild has a cast polymer clay pen in her gallery. That was the first I had seen, but that was several years ago. A lot has changed since!
 

edstreet

Member
Joined
Aug 12, 2007
Messages
3,684
Location
No longer confused....
Sorry, I did not mean to hijack the thread. I did want to point out that you have done some good work and very innovative and ground breaking work.
 

Russianwolf

Member
Joined
Jul 13, 2007
Messages
5,690
Location
Martinsburg, WV, USA.
Last edited:

edstreet

Member
Joined
Aug 12, 2007
Messages
3,684
Location
No longer confused....
Call me crazy if you want but I can fully envision these musical notes to be merged cast with some type of steam punk theme type. Not the watch parts or gears or the classic stuff but real steam punk themed.

Perhaps we can see some type of joint project in the future?
 
Joined
Aug 7, 2009
Messages
700
Location
Jamestown, NC
I am all for it!


Call me crazy if you want but I can fully envision these musical notes to be merged cast with some type of steam punk theme type. Not the watch parts or gears or the classic stuff but real steam punk themed.

Perhaps we can see some type of joint project in the future?
 
Top Bottom