Wood Drying Time

[renowb]

I hope this is the proper forum and this is a broad question because I know it depends on a lot of things like, wood type, etc.
How long does it take for a fresh cut piece of wood to dry out enough to make a pen? Thanks.

 

[lorbay]

I hope this is the proper forum and this is a broad question because I know it depends on a lot of things like, wood type, etc.
How long does it take for a fresh cut piece of wood to dry out enough to make a pen? Thanks.

In the micro wave about 10 min in stages. Naturaly 3 to 6 months depending on humidity.

Lin.

 

[Mac]

I use DA on the lathe after turning before finial sanding, if I am not for sure the wood is dry. Wood that is left after turning, at this point is very thin and the DA will soak threw. I have had good results using this method.

 

[flyitfast]

and DA is??? :question:
Gordon

 

[Rangertrek]

I would guess is is 'denatured alcohol". +1 on the microwave, just go slow and low.

 

[flyitfast]

Thanks! I didn't put 2 and 2 together. I use it but can't spell.

gordon

 

[ctubbs]

I dry mine in a table top grill using a 100 watt bulb under the grating. When the temp stabilizes using a thermometer through the top vents, the wood is dry. Usually takes 3 to 6 days, sometimes less.
Charles