Tinting GluBoost

[RGABEL]

I have a small imperfection on a project that I would like to fill will a black colored GluBoost. Purchasing the tint or bottle of black would be significant overkill for what I am in need of. Could you use a black "wood dye" to color the GluBoost? I have this on hand so it would be the easiest for this application.

 

[JohnU]

Usually the glue tints are powder. The dye contents will react different with different glues. I know I've used dyes with 5 min epoxy but not ca. All I can suggest is mix a little up and see what happens. It might crust up reacting to the wet dye.

 

[d_bondi]

Before I switched to GluBoost for my finish, I used Starbond CA. They have an opaque black and a translucent brown tinted CA, which I use for situations such as the one you have now. I still use Starbond for gluing and for working on imperfections.

 

[NJturner]

Second @d_bondi . I've used the black Starbond for lots of repairs on pens, castings, and other turnings. It works very well - and seems very durable.

Kevin