6" x 12" stabilizing chamber, built by myself. Was one of five I built and this is the last one I hung on to, with the plan of stabilizing again. But at this point I won't be getting started again, so it's time to move my last remaining chamber to a new home.
The bottom is a domed PVC cap, so you will need to fashion some sort of stand/holder to hold it upright. But, we're all woodworkers here, right? You'll figure something out pretty easily!
Includes disc to hold down the blanks, nuts I used as weights on tops of the disc, about 10' of hose w/ a quick connect on the end. I will also include the fitting I put together that allowed me to attach a quick connect fitting to my vacuum pump.
$175 + shipping
The bottom is a domed PVC cap, so you will need to fashion some sort of stand/holder to hold it upright. But, we're all woodworkers here, right? You'll figure something out pretty easily!
Includes disc to hold down the blanks, nuts I used as weights on tops of the disc, about 10' of hose w/ a quick connect on the end. I will also include the fitting I put together that allowed me to attach a quick connect fitting to my vacuum pump.
$175 + shipping