Sierra Bushings Fixed??

[Ken Massingale]

The bushings for Wall Street II's at Woodcraft are loose in the tubes , so I'm about to order some Sierra kits from AS. Are BB's bushings the correct diameter on the end that goes into the tube?
Thanks lots

 

[mrcook4570]

I think BB's are the corrected version. I know Ernie's are the corrected version.

 

[Ron Mc]

I have several sets of BB's Sierra bushings and they work fine.
Sorry to hear that you got an old set out of woodcraft.

 

[Ken Massingale]

Originally posted by Ken Massingale
<br />The bushings for Wall Street II's at Woodcraft are loose in the tubes [], so I'm about to order some Sierra kits from AS. Are BB's bushings the correct diameter on the end that goes into the tube?
Thanks lots

Thanks Stan and Ron.
ken

 

[leehljp]

Ken,

Look close at the holes being off center when you get the bushings. I ordered two sets when I started with Sierra's; one set from AS and one from BearToothWoods. I got them, put them in a large pill box together. Later, I found one to be visibly off center. I do not know if the bad one came from AS or BTW or I would have sent it back for a replacement.

 

[Pipes]

I been using the ones I got a few weeks ago AT Berea and NO problems
[]

http://affordablepipes.com/

 

[Randy_]

My understanding is that the off-center problem was resolved a month or two ago; but the bushings may still not be quite so snug as one might prefer.