Munsterlander
Member
A friend of mine suggested I could turn my non-variable speed lathe into a variable speed lathe using an inexpensive router speed control from Harbor Freight (<$15). Has anybody tried this?
Router speed control on Jet mini-lathe
- Thread starter Munsterlander
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
Rifleman1776
Member
Yes, people have tried that. And, if you do also, you can join the club of those who have burned out their motors. Different kinds of motors. Diffrn't animules completely.
alamocdc
Member
It'll work if you take a motor out of a router and replace the one in the lathe, but it'd be VERY noisy. I wouldn't want to turn on it.[}
]
]
Paul in OKC
Member
Wow, talk about a warp drive
cowchaser
Member
There is a variable speed kit for a jet on ebay right now for a little over 50 bucks that is going to end soon.
MobilMan
Member
Like "Rockler Woodworking" will tell you, It will not work.
rmelton
Member
Penn State has one for the Jet lathe http://www.pennstateind.com/store/TCLVSKIT.html
Fred
Member
DO NOT DO IT ....
Listen to the voices here on the Forum. It will work fora bit and then you will not be turning anything until you replace your motor.
Best to sell your current lathe and get one with a motor designed to utilize speed control. In the long run this will cost you less money, frustration, and headaches. Not to mention the loss of time while waiting for a motor to show up.
My advice and others will possibly agree ... SELL and UPGRADE. Heck even get yourself more lathe than you need because as you become more proficient in your turning skills you probably will feel the growing desire to upgrade anyway.
Listen to the voices here on the Forum. It will work fora bit and then you will not be turning anything until you replace your motor.
Best to sell your current lathe and get one with a motor designed to utilize speed control. In the long run this will cost you less money, frustration, and headaches. Not to mention the loss of time while waiting for a motor to show up.
My advice and others will possibly agree ... SELL and UPGRADE. Heck even get yourself more lathe than you need because as you become more proficient in your turning skills you probably will feel the growing desire to upgrade anyway.
leehljp
Member Liaison
I have one of those on my Rikon. I had to make a modification to the motor mounting plate, but I really really enjoy the VS!
n7blw
Member
Router speed controllers are intended for non capacitor-start motors. The Jet motors are capacitor-start motors. Look for the bulge on the motor housing to identify where the starting capacitor is located.
PTJeff
Member
Like n7blw (jim) said, it's a capacitor motor. I've been told that the rule of thumb is
"brushes in motor = variable speed control"
"brushes in motor = variable speed control"
louie
Member
Let me see if I understand this:
Router motor == brush motor == variable speed == noisy
Lathe motor == capacitor == non VS == quiet
so what kind of motor do VS lathes have? ( I guess I am mostly interested in noise level)
thanks
Lou
NJ
Router motor == brush motor == variable speed == noisy
Lathe motor == capacitor == non VS == quiet
so what kind of motor do VS lathes have? ( I guess I am mostly interested in noise level)
thanks
Lou
NJ