rockb
Member
Hi Guys, offering two sets of very intense redwood burl and a set of ironwood casting blanks. Hope you can use 'em. : )
RP69, $25.00 + $5.00 to ship = $30.00 total. California redwood burl casting blanks. Sixteen pieces will measure 3/4" x 3/4 x 2 1/2 to 4" long. These are sapwood "ends" that came from an incredibly intense pin burl slab. Some of them may be a little shy of 3/4". When I cut them, they were green and as they dried they warped a bit. When I sanded them to get some of the rough edges smoothed out, a less than 3/4 measurement was the result on a few of them. One dry pic and one misted. The "brown" tint is the color they all were before I sanded them. I didn't want to sand any more and use up wood. : )
RP70, $25.00 + $5.00 to ship = $30.00 total. California redwood burl casting blanks. Ten pieces will measure 3/4" thick by odd widths up to 1 1/2" wide x 5" long. These are sapwood "ends" that came from an incredibly intense pin burl slab. Some of them may be a little shy of 3/4". When I cut them, they were green and as they dried they warped a bit. When I sanded them to get some of the rough edges smoothed out, a less than 3/4 measurement was the result on some of them. One dry pic and two misted show two sides. The "brown" tint is the color they all were before I sanded them. I didn't want to sand any more and use up wood. : )
IP5, $25.00 + $5.00 to ship = $30.00 total. Desert ironwood (olneya tesota) casting blanks. Ten pieces will measure 3/4" on at least one dimension and an odd measurement on the other x at least 5" long. One dry pic and two misted show two sides.
That's all of 'em guys. If you'd like some please post in the thread and I'll PM you with details. Thanks to all you who buy my blanks. Rocky
RP69, $25.00 + $5.00 to ship = $30.00 total. California redwood burl casting blanks. Sixteen pieces will measure 3/4" x 3/4 x 2 1/2 to 4" long. These are sapwood "ends" that came from an incredibly intense pin burl slab. Some of them may be a little shy of 3/4". When I cut them, they were green and as they dried they warped a bit. When I sanded them to get some of the rough edges smoothed out, a less than 3/4 measurement was the result on a few of them. One dry pic and one misted. The "brown" tint is the color they all were before I sanded them. I didn't want to sand any more and use up wood. : )
RP70, $25.00 + $5.00 to ship = $30.00 total. California redwood burl casting blanks. Ten pieces will measure 3/4" thick by odd widths up to 1 1/2" wide x 5" long. These are sapwood "ends" that came from an incredibly intense pin burl slab. Some of them may be a little shy of 3/4". When I cut them, they were green and as they dried they warped a bit. When I sanded them to get some of the rough edges smoothed out, a less than 3/4 measurement was the result on some of them. One dry pic and two misted show two sides. The "brown" tint is the color they all were before I sanded them. I didn't want to sand any more and use up wood. : )
IP5, $25.00 + $5.00 to ship = $30.00 total. Desert ironwood (olneya tesota) casting blanks. Ten pieces will measure 3/4" on at least one dimension and an odd measurement on the other x at least 5" long. One dry pic and two misted show two sides.
That's all of 'em guys. If you'd like some please post in the thread and I'll PM you with details. Thanks to all you who buy my blanks. Rocky
