Problem with Dura Click EDC

[Monty]

I recently made my first EDC Dura Click pens. The one I have been carrying every day has a problem in that the click mechanism has a tendency to unscrew out of the cap coupler. Has anyone else had this problem? If so, how did you remedy the problem?

 

[Gersh]

Whenever I have something coming loose I use a dab of blue Loctite. If I need to dissemble it later it is still possible if difficult.

 

[TonyL]

Yes. It is common. Blue loctite is just keep an eye on it. The top and bottom come loose. Not the best design.

 

[Sly Dog]

Yes. It is common. Blue loctite is just keep an eye on it. The top and bottom come loose. Not the best design.

Loose top and nib has been my experience, too.

 

[magpens]

Perhaps this is strange to say in view of others' experiences expressed above, but I have not had this problem.

In fact, I have tried to remove (unscrew) the click mechanism, have been unable to do so, and concluded that PSI had it "stuck" in for good !

The weird thing, I thought, is that the PSI instructions show the click mechanism unscrewed from the cap coupler.

There's always more to "this business" than you expect at first.

 

[Monty]

I was thinking of using blue loctite but was concerned about getting it on the internal plunger.

 

[TonyL]

I was thinking of using blue loctite but was concerned about getting it on the internal plunger.

This may be one of my dumbest suggestions....a thin strip of Teflon tape? I haven't tried it.