Paladin
Member
Designed for mini, midi and smaller lathes with up to a 14" diameter swing, this chuck's small size and weight minimizes the load on smaller spindles and bearings and provides powerful performance for its size! Built to the same standards as the SuperNova2 and Titan chucks. Accepts all of Teknatool's accessory jaws. However, only those designed for smaller work are recommended. Includes an automatic jaw safety stop to keep the jaw slides from falling out. Jaw slides from iron composite impregnated with copper, which has outstanding qualities as an anti-seize and low friction agent. Chuck body is approximately 3-3/8" diameter, depth is 1-3/4" and weight is only 3 lbs. Handles up to 14" diameter bowls and turnings with up to a 6" length spigot when using the standard 50mm jaws. Includes chuck body, 3/4" x 16 TPI insert, woodworm screw, 50mm jaws, T-handled chuck key, manual and fasteners.
Weight is only 3 lbs
Handles up to 14" diameter bowls
Designed for mini, midi and smaller lathes with up to a 14" diameter swing
Includes G3 chuck and 3/4" x 16 TPI insert.
Plus, it includes one set of Nova Pin Jaws.
Pin Jaws operate like a pin chuck but without the hassles! An extended 25mm (1") length cylindrical jaw expands into a 25mm (1") or larger hole and grips the workpiece like a traditional pin chuck. Jaws can also be used as compression mode spigot jaws. This jaw set is $50 at Amazon.
The G3 itself with the threaded insert is $150.00. So, the Amazon price for these two items is $200.
Yours for only $150, shipped. Or make offer, money talks.
Square Cash preferred.
https://square.com/cash
Weight is only 3 lbs
Handles up to 14" diameter bowls
Designed for mini, midi and smaller lathes with up to a 14" diameter swing
Includes G3 chuck and 3/4" x 16 TPI insert.
Plus, it includes one set of Nova Pin Jaws.
Pin Jaws operate like a pin chuck but without the hassles! An extended 25mm (1") length cylindrical jaw expands into a 25mm (1") or larger hole and grips the workpiece like a traditional pin chuck. Jaws can also be used as compression mode spigot jaws. This jaw set is $50 at Amazon.
The G3 itself with the threaded insert is $150.00. So, the Amazon price for these two items is $200.
Yours for only $150, shipped. Or make offer, money talks.
Square Cash preferred.
https://square.com/cash