creativewriting
Member
I have a 3" collet chuck (fixture) that has not been used. This will fit many of the 7 X metal lathes (grizzly, HF, Micro, etc.) that has a 3" plate. Mine ended up using a 4" so I had to order another. Little Machine Shop sells these for $199, but I got a deal at $75+shipping. Not looking to make a profit, just want to find it a good home.
The fixture chucks are great because you don't lose the through hole and they tend to be more stable when turning. I was using a 3MT collet chuck, but you can turn longer rods due to the draw bar. This chuck mounts directly to the faceplate using the existing chuck screws. I use this chuck 99% of the time. This is for the chuck only!
Please PM me if you are interested and have a great day!
The fixture chucks are great because you don't lose the through hole and they tend to be more stable when turning. I was using a 3MT collet chuck, but you can turn longer rods due to the draw bar. This chuck mounts directly to the faceplate using the existing chuck screws. I use this chuck 99% of the time. This is for the chuck only!
Please PM me if you are interested and have a great day!
