Harry Potter wand pen

[mapletree]

Looking for information on making a Harry Potter wand pen

 

[Drewby108]

A wand or a pen? Or are you wanting to make a wand that also holds a nib/rollerball/ballpoint at one end?

 

[mapletree]

I'm going to make a wand with a twist pen like making an 11" desk pen. Just asking if anyone has made this and what might be different from making a desk pen.

 

[randyrls]

I have made "long handled" pens kind of like the old dip pens. Just need a longer piece of material. No reason to go longer than the normal pen length.

Hmmmm.. I wonder if there are antique brass pen nibs?

 

[Edgar]

You can pretty much make one-piece pens any length or shape you want. I've never made a wand-shaped pen, but I've made a few desk-pen styled slimlines and I made this magnum wine bottle shaped Sierra pen a few years ago. It sits on a shelf in my shop.

 

[jttheclockman]

You can pretty much make one-piece pens any length or shape you want. I've never made a wand-shaped pen, but I've made a few desk-pen styled slimlines and I made this magnum wine bottle shaped Sierra pen a few years ago. It sits on a shelf in my shop.

Yea remember than one. Drew some comments for sure.

 

[jttheclockman]

Do a web search here and you will see lots of wand examples and then incorporate a pen. here is one thread and scroll down to #16 and see their pen.
https://www.penturners.org/threads/my-first-pen.64064/#post-1048001

Wands
https://www.penturners.org/search/104129/?q=harry+potter+wands&o=relevance

 

[egnald]

Not too long ago, I made a long desk pen from a PSI Premium Designer NT kit. I used two blanks. The first was cut to the length of the lower tube, but I left the second one 5-inches long and only drilled deep enough to accomodate the upper tube. I prefer the Premium Designer over the "Regular" Designer's because it uses a Parker type refill.

On this first one I used the center band from the kit; however, the next time I make one, I will be eliminating the center band and simply drilling a shallow counterbore in the upper blank instead. Sort-of merging two modifications into one.

This is the "Long - Closed End" Premium Designer NT that I made as a Desk Set.


This is the Premium Designer NT with the "No Centerband" modification.


With the extra length (closed end) and the "mostly wood" construction without the center band I think it might be shaped to make an attractive magic wand that incorporates a pen.

Regards,
Dave

 

[Sylvanite]

A double-closed-end pen can take on many shapes. I've done a belaying pen, a zen garden rake pen, and (of course) a wand pen, which you can see at https://www.penturners.org/threads/the-r-b-crafts-freestyle-pictures.108003/#post1510312

I hope that helps,
Eric