Grizzly Pressure pot

Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
I don't have that one but did notice something that would turn me away from it. The pot I use is one from Harbor Freight and has a maximum pressure of 80 lbs with a "working pressure" (whatever that means) of 30-60 lbs.

I noticed in the Amazon ad that the one you're looking at has a maximum pressure of 45 PSI.

I routinely cast my "worthless wood" blanks around 65 psi to insure the resin is forced into the tiniest of crevices in the wood. I found that pressure lower than that doesn't work as well and I was taught by the master himself... Curtis!

This is just one opinion, I'm sure others have theirs :smile:
 
Thanks for the input George. We have also been looking for a Pressure Pot that doesn't cost an arm and leg - won't be looking at the Grizzly though based on that info!

Linda
 
try your local sears first. they are selling theirs out on clearance. about $60. check over by the air compressors.
 
You must log in or register to reply here.
Back
Top Bottom