Dust Funnel / Vortex Separator Thing Recommendation Please

Signed-In Members Don't See This Ad
TonyL

TonyL

Member
Joined
Mar 9, 2014
Messages
8,917
Location
Georgia
Hi Folks:

Which do you like? I have a good budget, but don't have to spend more if a knock-off does the same thing. I prefer non-China-made if there is such a thing.

I have about a 7 foot run between my lathe and DC.

I have less than zero interest in making one myself, despite seeing some very nice ones.

Thanks for reading and sharing you opinion.
 
Signed-In Members Don't See This Ad
Curly

Curly

Member
Joined
Nov 20, 2010
Messages
4,853
Location
Saskatoon SK., Canada.
I have the CV-06 Mini System but set it up like the Oneida Bagger. It'll handle pen project sized dust from the lathe but not the dust and shavings a planer or cabinet saw will generate. For that kind of work you need a full sized dust collector.
www.clearvuecyclones.com

CV06 Mini System - Clear Vue Cyclones

Based on the revolutionary Bill Pentz design, the Clear Vue Cyclones Mini CV06 adds cyclonic separation to any shop vacuum. The inlet size receives a 2 1/4" O.D. vacuum hose – (adapters to other shop vacuum sizes sold separately). With the benefit of extended filter life and uncompromised...
www.clearvuecyclones.com www.clearvuecyclones.com
You'll have to select the US price to get your dollar prices.
Buying North American has a greater cost.
 
You must log in or register to reply here.
Previous Next
Top Bottom