Coloring stabilized blanks?

Signed-In Members Don't See This Ad
Status
Not open for further replies.
C

Cowboy

Member
Joined
Sep 1, 2005
Messages
27
Location
.
I have read Lees article on vacuum stabilizing pen blanks with poly. I am going to try it tonight with some redwood burl. Is it possible to dye the poly so the blank takes on the color of the dye? What is the best dye for this? Will RIT clothing dye work with oil based poly? I would be interested in trying maybe a red or blue dye.

Chris
 
Signed-In Members Don't See This Ad
I will be interested on learning about this too. Not to hijack but can we add plexi-acetone mix on the list? I want to know if there is a dye that will work with it too. [:D]
 
I'd try the liquid coloring agents they sell for polyester resin. While not the same as poly or plexi, if I remember my highschool chemistry classes they are in at least the same family and the colors might work.
 
BTW Chris, for some reason redwood seems to be resistant to stabilization. Not sure if it will take Poly better but I tried plexi-acetone and though it is taking...it seems very slow. Much slower than the ones I tried with the same solution (i.e. spalted maple, spalted buckeye, spalted alder) Of course the reason the others worked so well may be because they are spalted [:D]
 
Originally posted by JimGo
<br />I'd try the liquid coloring agents they sell for polyester resin.
Click to expand...

Do you know if they sell it at Michaels (craft store)?

Dario:

I will try some spalted wood as well.

Chris
 
Originally posted by alamocdc
<br />It's not resistant under a vacuum. [;)]
Click to expand...

Okay Billy, I promise to get the final connection of my vacuum setup done next week [B)][;)]

BTW, before I left this morning the blanks are sinking a bit already...so there is hope [;)].

The plexi-acetone solution turned reddish though...almost like strawberry red...looks yummy!!! [:D]
 
I have done a lot of experimenting on stabilising badly spalted pen blanks. My favorite is epoxy thinned with DNA to the consistency of maple syrup. I have added color to this mix and had good results. here is an experimental American Flat Top spalted hackberry that was stabilized with the Epoxy/DNA mix colored with Transtin bordeaux dye. This dye will mix with just about anything. You might give it a try.

ColoredEpoxySPHack.jpg
 
Originally posted by Dario
<br />
Originally posted by alamocdc
<br />It's not resistant under a vacuum. [;)]
Click to expand...

Okay Billy, I promise to get the final connection of my vacuum setup done next week [B)][;)]

BTW, before I left this morning the blanks are sinking a bit already...so there is hope [;)].

The plexi-acetone solution turned reddish though...almost like strawberry red...looks yummy!!! [:D]
Click to expand...

Just don't eat it Dario! We all need you around to sell us great wood.[8D]
 
Status
Not open for further replies.
Back
Top Bottom