Closed end mandrel

Signed-In Members Don't See This Ad
dansills

dansills

Member
Joined
Jan 14, 2012
Messages
387
Location
Newberry FL 32669
I already have a set from Arizona Silhouette but would like to have some more so I don't have to mount and re-mount when finishing. Before I buy new ones I wanted to see if perhaps anyone had some for the JR's that they wanted to part with? Will also entertain pin chucks made by rherrell or equal quality. Will buy or trade. Thanks!
 
Signed-In Members Don't See This Ad
Just make your own for next to nothing. 1/4" round stock from Home depot or lowes & grind you a slot for the holding pin. Cheap & eazy peezy.

Or go really fancy & buy a single 1/4" clevis pin to length you want & modify it. Even cheaper.



Bill
 
Ok, I had not seen those AS mandrels before gives me an idea on building something similar for my own use. I have been using a long rubber sanding drum mandrel does same job- never thought of using a lag bolt shield turned down to size.

Bill
 
thanks seamus - i already have several though for the barons. thank you for replying - seems Mack wants to take them off your hands!
 
You must log in or register to reply here.
Back
Top Bottom