Carbide woodturning tools

Signed-In Members Don't See This Ad
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,394
Location
thomasville, nc, USA.
I have some of the Carbide turning tools that I make.

Rougher 15mm x100mm (4") radius on 1/2" x 1/2" square 304 stainless steel 9" long with 2 " tang




Rougher 15mm x100mm (4") radius on 1/2 round tool steel bar



Fnisher 16 mm round mounted on 1/2" round tool steel



Diamond Detailer 3/8 x 3/8 stainless steel bar 8" long. 2" tang(normally 9" long,these ended up a little short and discounted them a little)



Finisher 12mm Round 3/8 x 3/8 stainless steel bar 9" long. 2" tang



Rougher on 1/2" square bar $25 plus shipping
Rougher on 1/2" round bar $25 plus shipping
Diamond detailer on 3/8 bar $31 plus shipping
Finisher 12 mm round on 3/8 bar $27 plus shipping
Finisher 16mm on 1/2" round bar $30 plus shipping
Finisher 16mm on 1/2" bar $30 plus shipping

I do have replacement inserts:
$5 each:
15mm x 15mmx 4"r (100mm)
15mm x 15mmx 6"r (150mm)
15mm x 15mmx square

16mm $10.00
12mm $8.50
Diamond detailer $9

Shipping on the inserts is $.75 each first class mail if you want tracking that will additional.
If you buy one of the turning tools and extra inserts at the same time there is no extra for the shipping the inserts.

I do have the 16mm round finisher but don't currently have any made, If you are interested in the square stainless bar let me know and I can make one. May take a day or two to make.

John
 

Attachments

  • 20150819_113806_zpsscpoyfjz.jpg
    20150819_113806_zpsscpoyfjz.jpg
    98.5 KB · Views: 561
  • 20160328_205925_zps1nt7ngng.jpg
    20160328_205925_zps1nt7ngng.jpg
    131.5 KB · Views: 725
  • 20151220_223905_zpsxzxo5zjf.jpg
    20151220_223905_zpsxzxo5zjf.jpg
    65.5 KB · Views: 667
  • 20151220_220037_zpsy2ooxa4e.jpg
    20151220_220037_zpsy2ooxa4e.jpg
    65.5 KB · Views: 521
  • 20160328_210257_zpsapwrl71l.jpg
    20160328_210257_zpsapwrl71l.jpg
    123.7 KB · Views: 524
Signed-In Members Don't See This Ad
hanau, I didn't realize you were a member here. I bought the 16mm finisher with square bar from you on Ebay.

For anyone interested, these are very well made. I am very pleased with mine. I will post a picture of mine with the handle I made later, if anyone is interested.
 
DLGunn said:
hanau, I didn't realize you were a member here. I bought the 16mm finisher with square bar from you on Ebay.

For anyone interested, these are very well made. I am very pleased with mine. I will post a picture of mine with the handle I made later, if anyone is interested.
Click to expand...


Thanks
For the purchase. if you need replacement inserts let me know here and it will save you a little more on the price.


Have a few people contacting me about tools.

I am currently out of the 16mm inserts but do have them on order. They are scheduled to be here Thursday Sept 8. They do usually show up before the delivery date.

I do have everything else in stock.
Ill update this when the 16 mm inserts arrive.
 
I'd like a diamond detailer with two extra inserts. Please let me know the total and your PayPal info and I will make the payment.

Jim Smith
Conyers, GA 30094
 
Received the 16mm finisher inserts today.


I should of sent everyone a message that their tools had shipped or packaged and ready to go.

If you order and didn't get a conformation of shipping let me know.

Thanks for everyone's purchase.
John
 
John got mine today. They look beautiful. Will post pics after I put some handles on them. Going with a 60's style tye-dye effect. Might as well turn with pretty handles as well as pretty tools. Thanks again.
 
I would like a 12mm and 16mm finisher on round bar stock with 1 extra insert for each. Please send total and I will pay by Paypal.

Thanks,
Steve
 
I would like the 15mm radius on 1/2 inch square bar. Let me know total and will pay with PayPal .

Thanks Tony
 
Last edited:
I have all inserts and tools back in stock.

I think I have sent a message to on tools that I ran out of and will ship when I got the inserts in.
If I haven't sent you a message and owe something please let me know.


I also added a rougher inserts in a 2"/50 mm radius in stock now. Limited amount of them.

I have also made a 3/8" tool steel diamond detailer.



Rougher on 1/2" Stainless steel square bar $25 plus shipping
Rougher on 1/2" round tool steel bar $25 plus shipping

Finisher 16mm on 1/2" Stainless steel bar $30 plus shipping
Finisher 16mm on 1/2" round tool steel bar $30 plus shipping

Finisher 12 mm round on 3/8 Stainless steel bar $27 plus shipping
Finisher 12 mm round on 3/8 round tool steel bar$27 plus shipping

Diamond detailer on 3/8 Stainless steel bar $31 plus shipping
Diamond detailer on 3/8 round tool steel bar$31 plus shipping


I do have replacement inserts:
$5 each:
15mm x 15mmx 2"r (50mm)
15mm x 15mmx 4"r (100mm)
15mm x 15mmx 6"r (150mm)
15mm x 15mmx square

16mm $10.00
12mm $8.50
Diamond detailer $9

Shipping on the inserts is $.75 each first class mail if you want tracking that will additional.
If you buy one of the turning tools and extra inserts at the same time there is no extra for the shipping the inserts.

John
 

Attachments

  • 20161002_190553_zpsa6vhxwfm.jpg
    20161002_190553_zpsa6vhxwfm.jpg
    110.3 KB · Views: 305
Last edited:
These are awesome tools and the price is excellent. Shipping and communication is awesome. Highly recommend these tools if you want to try carbide. I have the easy tools and these work just as well. Thanks again.
 
Hi John,

I'll take the following:

Stainless Steel Finisher 12 mm round on 3/8 square bar / round tang: $27 plus shipping

3 additional inserts

Thanks. Please let me know how to pay. If you need it, here is my PayPal info:

hobblecreekcraftsman@gmail.com
 
Hey John, checking to see if you have the diamond cutters as well as the square r2 cutters in stock. Just the cutters - don't need the bars.

Thanks!
 
Hi John,

I'll take the following:

Finisher 16 mm round mounted on 1/2" round tool steel

Rougher 15mm x100mm (4") radius on 1/2" x 1/2" square 304 stainless steel 9" long with 2 " tang

I will also take an extra cutter for each of those.

My PayPal account is hobblecreekcraftsman@gmail.com

Thanks John. You make excellent tools!
 
Hi,
I'd like to request:
One Rougher 15mm x100mm (4") radius on 1/2" x 1/2" square 304 stainless steel and one replacement cutter.
One Finisher 16 mm round mounted on 1/2" round tool steel
My paypal account is fisherhahn@roadrunner.com or just PM me the info to make the payment.

Thanks!
 
Have the diamond inserts back in stock now.
Also Have switch the round stock from tool steel to Stainless steel.

I have also started making the Diamond Detailer in a 1/2" Stainless steel bar.
 

Attachments

  • 20170118_103941_zpsfxgjbioz.jpg
    20170118_103941_zpsfxgjbioz.jpg
    139.4 KB · Views: 243
Last edited:
You must log in or register to reply here.
Back
Top Bottom