Best Flat Top American kit

Signed-In Members Don't See This Ad
brycej

brycej

Member
Joined
Jan 24, 2008
Messages
110
Location
Vancouver, BC, Canada.
Which company sells the best Flat Top American fountain pen kit? What features do you like the best? The worst? What have your experiences been?

I have had a number of people ask me for a fountain pen version of the Flat Top American ballpoint that I make. I have used the kit from Lee Valley about 6 months ago but I wasn't that happy with it.
 
Signed-In Members Don't See This Ad
I ordered 8 kits from Berea from the last group buy, and have had no problem with the quality of the kits. The design, on the other hand, lets just say I'm still trying to work around some of the issues. It is, however, to my knowledge the slimmest fountain pen kit on the market, and the least expensive. The metal to metal threads are an issue, but again, we hear reports of even the best kits out there opening in pockets. The section is also plastic instead of epoxy coated brass. The nib is average quality, and the pen once assembled does write quite nicely.
 
The Berea "Streamline American" is an improved version with better threads. They are still metal, but they are smoother, and stay together better than the older "Flat-Top" kit.
 
RussFairfield said:
The Berea "Streamline American" is an improved version with better threads. They are still metal, but they are smoother, and stay together better than the older "Flat-Top" kit.
Click to expand...

I have been wondering about the Streamline American but I have not seen any reviews of it. I do like the look of this kit more than the standard American.
 
gwilki said:
Bryce
The LV kit is the Berea kit, just FYI.
Click to expand...

Yes, I had thought it was, but wasn't sure if it was the Series 2000. I just found one of the bags from it and it indeed is the Series 2000 from Berea. I was surprised how different this kit is from the ballpoint pen. The finial is different, the center band is different.
 
I use a flat top from CSUSA. It has the click top; I use it daily; it is almost 3 years old and I've had no issues with it. I just don't like the metal threads of the Berea version and I like the center band of the CSUSA version much better also.
Do a good turn daily!
Don
brycej said:
Which company sells the best Flat Top American fountain pen kit? What features do you like the best? The worst? What have your experiences been?

I have had a number of people ask me for a fountain pen version of the Flat Top American ballpoint that I make. I have used the kit from Lee Valley about 6 months ago but I wasn't that happy with it.
Click to expand...
 
scotirish said:
I have made a number of them from Woodcraft and have been happy 98% of the time. They are #126670.
Check this out: http://www.woodcraft.com/family.aspx?familyid=1574
Click to expand...

I like the Woodcraft kit, I use the fountain pen interchangeably with a Wall Street II ball point.

My biggest complaint with the WC flat top American are the threads. They don't hold well unless you CRANK 'em down and the plating wore off after 6 months.

Otherwise, it writes beautifully and is easy to hold and write with.
 
I haven't yet tried the Streamline that Russ mentioned, but I certainly would take what he said seriously. He has me considering that kit for sure.


To date, the best writing pen I made was a CSA Americana FP. The ONLY two reasons I no longer have the pen is that the plastic snap cap split (after 6 mos) and the rhodium pitted terribly--- it was one of the dozen or so pens I had to send back to them.

The snap cap gets mixed reviews--- I think it's hit or miss, but honestly I think there are more people that are happy with it than there are people that aren't. Me---- I'm exceptionally picky.
 
Hi, i use the Classic American from PSI. I like them for RB, but for a FP i don`t like them they skip and i don`t like the line. I like to make them,and i like the design. If i just could order a better nib and knew how to take the nib off and swap them fo the better ones i would, then i would try to sell them, but the way it writes now i wouldn`t dare to try and sell them. Carl
 
I've done several 3 or 4 of the series 2000 from AS/ Berea, the tenon is very critical and watch the inside of the cap tube, good idea to chamfer it where it goes on to the section.
It has the typical IPG nib, it writes smoothly with good ink, and people seem to like the feel in their hand.
My only gripe is the Very thin plastic tube that holds the finial, I haven't had any break, but it looks like a possible weak point in the otherwise nice yet inexpensive fountain pen kit
 
Last edited:
I can tell you that PSI has made some changes to their line of "Parker Style" flat tops. The good news is the plastic nib and and top ends are now metal and noticeably sturdier. The bad news is that the fountain pen and rolling writers now have different threads so you can't interchange the two bodies! :mad: We've been able to make a number of sales at shows by telling customers that "we can make that a fountain pen on the spot" if they liked the body of a rolling writer but really wanted a fountain pen. Why PSI decided to do this is beyond me, unless they think they could sell more fountain pens. We're waiting 'till we've used up the last few kits and will bite the bullet for new kits and bushings from another company.
 
You can! Contact Lou Metcalf, aka DCbluesman, and get one of his flexible steel nibs. I have one on all of my fountain pens and they work great. Never skips and writes every time. I have one of the small ones on my americana FP. Good ink also helps. The ink cartridge that comes with our kits goes in the trash as soon as I open the pkgs. I don't even send them to a customer. I include a cartridge of Noodlers or Private Reserve ink.
Do a good turn daily!
Don
fernhills said:
If i just could order a better nib and knew how to take the nib off and swap them fo the better ones i would, then i would try to sell them, but the way it writes now i wouldn`t dare to try and sell them. Carl
Click to expand...
 
its_virgil said:
You can! Contact Lou Metcalf, aka DCbluesman, and get one of his flexible steel nibs. I have one on all of my fountain pens and they work great. Never skips and writes every time. I have one of the small ones on my americana FP. Good ink also helps. The ink cartridge that comes with our kits goes in the trash as soon as I open the pkgs. I don't even send them to a customer. I include a cartridge of Noodlers or Private Reserve ink.
Do a good turn daily!
Don
Click to expand...

I have to agree, Lou's nibs are first rate. I find they write very smoothly. It is very easy to change a the nib, much easier than I thought it would be.
 
I've turned both the Wodcraft Classic American Screw Cap fountain and ball point kits. I've become a firm believer that I can make the ball point kits and then order the fountain pen nibs and guts through Arizona Silhouettes. If someone falls in love with a pen, but wants it in a fountain pen, I can convert on the spot or sell seperate. Has anyone tried this....look like they should work....
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom