Sold Amboyna burl

[isaacrapelje]

All groups are dry Amboyna burl ready to turn. There might be small defects like a bark pocket or small crack in sapwood. This burl is from Cambodia so it is about 30% more dense than the amboyna from Indonesia.

Group B: 4 pieces $28 plus shipping

Group C: 5 amboyna with sapwood longest is 7 inches $40 plus shipping

Buy both for $60 plus shipping from 98382.

 

[RDH79]

Are Group B 3/4" or 7/8"?
Thank You!!

 

[isaacrapelje]

group B are 3/4 inch

 

[RDH79]

If you cut 4 or 5 7/8+ x 5 1/2"
Solid no sap like those let me know.
Thank You!!

 

[isaacrapelje]

I can cut some for you. They will be a bit more expensive because they are bigger but I will make sure you get some nice blanks. I do have some of these cut from this huge slab that are 7/8 to 1 inch thick.

 

[RDH79]

Sounds good. 4 please.
Let me know total
Shipped to Pa 16248

 

[Mike Hill]

Isaac, I'll take both groups. Wouldn't mind some 2-tone in say at least in 1"x1"x6"

 

[isaacrapelje]

Isaac, I'll take both groups. Wouldn't mind some 2-tone in say at least in 1"x1"x6"

You got both groups. How many of the larger blanks? They will be more expensive because they are larger and more scarce due to limited sapwood in the burls. Let me know how many and I will cut some. Thanks

 

[isaacrapelje]

@RDH79 here are some roughly 15/16 inch by 5.5 inch pieces. The one on the right has a very solid bark line that should be easy to fill with CA glue.

 

[isaacrapelje]

Isaac, I'll take both groups. Wouldn't mind some 2-tone in say at least in 1"x1"x6"

Here is one two tone blank. I can cut some more.

 

[RDH79]

@RDH79 here are some roughly 15/16 inch by 5.5 inch pieces. The one on the right has a very solid bark line that should be easy to fill with CA glue.

I'll take them. What's the total?
And your payment info?

 

[isaacrapelje]

I'll take them. What's the total?
And your payment info?

Pm sent

 

[isaacrapelje]

Here are 4 amboyna pieces with sapwood cut 1 inch square by 6 inches long. There are some hairline cracks in the sapwood that will need a little CA glue but it is nearly impossible to get the sapwood without cracks. Let me know if these will work for you.