Abrasives?

[scalawagtoo]

I am using a new disc/belt sander, it's craftman 6" belt/9"disc.
I found a source where I can buy belts and discs by the box of ten at a good price.

I use a lot of 120 grit sheets, 220, 320, 400, 500, 600, 1500, 2500.
does anybody have a source for sheet abrasives at a good price?

 

[smoky10]

Try this place.

http://www.onlineindustrialsupply.com/index.html

 

[tomwojeck]

I've bought a lot of stuff from Klingspor's. I haven't taken the time to compare their prices.

 

[scalawagtoo]

Smoky-
I thought I had a good price. You just saved me 50% on belts and disc I could get for four dollars are 25 cents there. I'll have to use 8" instead of 9" but for a quarter a piece I'll do it.[][][]

 

[Rifleman1776]

Originally posted by tomwojeck
<br />I've bought a lot of stuff from Klingspor's. I haven't taken the time to compare their prices.

They are a bit high compared to others. But they do have the selection. I buy from them because they have what I need and that's easier than shopping around.

 

[Scott]

Don't forget that Klingspor's has their Bargain Boxes of belts and disks, and we have a group discount available through IAP for them that takes 10% off. Look on the main page here for the link to sign up for the group discount. If you need to order very soon, drop me an E-Mail and I'll get it sent in right away. I usually wait to get a few before I send them in, but I can do it most anytime!

Scott.

 

[lawry76]

Smoky, on the sandpaper site you listed, do you buy the wet/dry silicon carbide sheets? Thanks.

 

[smoky10]

I usually buy the shop rolls. 50yds. for about $9.00 each. You can get them in grits from 40 to 500 and in widths of 1in, 1.5in, and 2in.

 

[ldimick]

Thanks Tom! I just placed my order. Wish I would have seen this thread earlier as I went to Woodcraft this morning and spent $4.99 on a 20' roll. At least I have enough to get through the weekend.

 

[alamocdc]

I've found pretty good prices here, especially on closeouts. http://www.supergrit.com/