A quick Baron question

[DKF]

When you guys are done sanding on the Baron, are you at all proud of the bushings, or are you exactly the same size of the bushing? Thank you.

 

[NavyDiver]

I sand to exactly the size of the bushings.

 

[mrcook4570]

I'm usually a few thousandths below the bushings. My finish makes up the difference.

 

[DKF]

Thank you guys........that gives me the info. I need!

 

[Russb]

I use a set of calipers to measure the pen parts. I then measure my bushings. If they are spot on I turn to the bushings. If not I make any needed adjustments. So I would say I turn the the calipers.