Weeping Cherry Plate

Signed-In Members Don't See This Ad

Mortalis

Member
Joined
Aug 19, 2013
Messages
664
Location
Bardstown, Ky
Took down a smallish Weeping Cherry in the backyard. The trunk was about 17" diameter so, I decided I'd do it proud by at least creating some beautiful turnings from it. The graining is crazy and I can't wait to turn a bowl.
Anyways, here is a 7" plate that I twice turned. After the first turning (Roughing) I dried the roughed out piece in my small convection oven I use for stabilizing. When I did that the bowl developed some gi-normous cracks and was a bit punky. I stabilized it, colored some epoxy and filled the crack(s) then second turned it.
Was a lot of work but all it cost was time and some stabilizing solution.
Let me know what ya'all think!
 

Attachments

  • 7in platter 1.jpg
    7in platter 1.jpg
    290.1 KB · Views: 114
  • 7in platter 2.jpg
    7in platter 2.jpg
    299.6 KB · Views: 113
  • 7in platter 3.jpg
    7in platter 3.jpg
    290 KB · Views: 119
Signed-In Members Don't See This Ad

BULLWINKLE

Member
Joined
Nov 8, 2010
Messages
652
Location
Georgia
Beautiful work. The wood is nothing short of spectacular. Ordinarily, I wouldn't take that much trouble on a single project but this one was definitely worth it !!!
 

Mortalis

Member
Joined
Aug 19, 2013
Messages
664
Location
Bardstown, Ky
Beautiful work. The wood is nothing short of spectacular. Ordinarily, I wouldn't take that much trouble on a single project but this one was definitely worth it !!!
Thank you,
Since I retired, I have time to do these types of things. I like the challenge and seems like eveytime I save one of these pieces it turns out to be spectacular and I was glad I spent the time.
 

Mortalis

Member
Joined
Aug 19, 2013
Messages
664
Location
Bardstown, Ky
Never heard of a weeping cherry before.

Lovely piece of timber.

Nice work.
I was shocked and in awe when I starting blanking it out. All the timber has these striations. We had one of these tree in our former residence and it was beautiful in the Spring. When we moved we found our new residence had a smaller version that the past owner or someone just butchered the top portion. It didnt flower this Spring and it was an eyesore as a tree. Now it serves anew.
 

BULLWINKLE

Member
Joined
Nov 8, 2010
Messages
652
Location
Georgia
Thank you,
Since I retired, I have time to do these types of things. I like the challenge and seems like eveytime I save one of these pieces it turns out to be spectacular and I was glad I spent the time.
The only wood that I have ever seen that comes close to that is sinker Cypress. Unfortunately it is cost prohibitive and extremely hard to work with. The top for that table is $4,000. The photo is from the internet not much mine way out of my price range
0329EAD1-EA4A-46B8-898F-58C623D40BFB.jpeg
. I'm retired also. Guess I am lazier in my old age.
 

BULLWINKLE

Member
Joined
Nov 8, 2010
Messages
652
Location
Georgia
That has gorgeous grain ! Well worth the time and effort spent when you end up with a piece looking like that . Personally , I would keep to the plates rather than go to bowls , as a way to maximize the number of pieces I could get out of it .
I agree. Turning bowls with that awesome wood will waste a lot of material.
 

boycemuske87

Member
Joined
Jun 23, 2023
Messages
2
Location
Canada
Took down a smallish Weeping Cherry in the backyard. The trunk was about 17" diameter so, I decided I'd do it proud by at least creating some beautiful turnings from it. The graining is crazy and I can't wait to turn a bowl.
Anyways, here is a 7" plate that I twice turned. After the first turning (Roughing) I dried the roughed out piece in my small convection oven I use for stabilizing. When I did that the bowl developed some gi-normous cracks and was a bit punky. I stabilized it, colored some epoxy and filled the crack(s) then second turned it.
Was a lot of work but all it cost was time and some stabilizing solution.
Let me know what ya'all think!
:eek:
 

Woodchipper

Member
Joined
Mar 15, 2017
Messages
5,372
Location
Cleveland, TN
Those are nice bowls. Adding the epoxy, to me, adds a bit and breaks up the overall grain of the wood which here is eye-catching. Never heard of weeping cherry. Thanks for sharing the turning and the story. My weeping is when I screw up a nice piece of wood.
 

Mortalis

Member
Joined
Aug 19, 2013
Messages
664
Location
Bardstown, Ky
That has gorgeous grain ! Well worth the time and effort spent when you end up with a piece looking like that . Personally , I would keep to the plates rather than go to bowls , as a way to maximize the number of pieces I could get out of it .
Wayne,
I actually have quite a bit of the timber. I have three center pieces (with pith) that should make for some very interesting platters.
 

Attachments

  • PXL_20230624_152257264.jpg
    PXL_20230624_152257264.jpg
    633.7 KB · Views: 66

BULLWINKLE

Member
Joined
Nov 8, 2010
Messages
652
Location
Georgia
I've heard of weeping cherry but never realized how beautiful the wood is. Stands to reason as the tree is very beautiful.
 

boycemuske87

Member
Joined
Jun 23, 2023
Messages
2
Location
Canada
The only wood that I have ever seen that comes close to that is sinker Cypress. Unfortunately it is cost prohibitive and extremely hard to work with. The top for that table is $4,000. The photo is from the internet not much mine way out of my price range View attachment 355843. I'm retired also. Guess I am lazier in my old age.

I spend a lot of time studying and immersing myself in this topic. Reading plays a huge role in my journey to awareness and understanding of this area. Each new book, article or blog that I find brings me satisfaction and new knowledge. I often use http://essaypapers.reviews/ for this. I sincerely hope that my passion and dedication to this field will help me grow and reach new heights. Share what hobbies inspire you!
wow
 

Mike

Member
Joined
Oct 23, 2022
Messages
302
Location
Albuquerque
Wow. Very nice. The wood is beautiful and you did a very nice job. Sounds like a lot of work, but worth it. As derekdd said above, never heard of weeping cherry.

Mike
 

donstephan

Member
Joined
Jul 24, 2016
Messages
258
Location
Cincinnati Ohio
Turned some sort of weeping cherry once for a fellow that wanted bowls for his daughters. Had to fill cracks in every one, hope to avoid the wood in the future.
 
Top Bottom