liljohn1368
Member
What is the best finish to use for a wood pen?
What is the best finish to use for a wood pen?
I would strongly suggest staying away from CA for a while. Try a friction polish, just a wax, or even a laquer....or something similar. CA has a learning curve to get good at it and can be frustrating. With CA, it's best to practice on scrap wood to establish a process that works for you. Lots of good info here in the library and using the search feature. Best of luck!
Why not practice what ever finish you want on the actual material you are using. I find I get great results on scrap wood, then poor results, using the same method, on different wood.
Once the square blank is turned round, ( miles before the bushes ) sand it a bit and apply your finish of choice. Then turn the finish off and do it again, and again until you get to final size. :wink:
I've been looking at some ca finishing glue. Says it has a longer cure time. I might try that on a piece of this kickory.