Think I could cut blanks on this?
- Thread starter OKLAHOMAN
- Start date
Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad
papaturner
Member
With a sharp blade and take your time I think it might work.:biggrin:
Woodlvr
Member
Roy is this a tool gloat?
:biggrin:
:biggrin:
S
spiritwoodturner
Guest
What is that, a Grizzly? Boy, is this post timely...
I need to get my Jet set up to cut my blanks.
Dale
I need to get my Jet set up to cut my blanks.
Dale
OKLAHOMAN
Member
Mike, for those that have seen my shop, They know I would have to raise the ceiling and stretch the walls :biggrin:to get that beast in, for now I will have to accept that my Crapsman.:frown:
Roy is this a tool gloat?
marcruby
Member
Sheesh! All that power and only a 12" cutting height. What a waste for resawing.
Marc
Marc
OKLAHOMAN
Member
hewunch
Member
you have 3 phase in your garage?!?
tim self
Member
Roy, I think you should get it. But you may need to get a larger building to put it in!
woodman928
Member
yeah it would!!!! even with the blade on backward :biggrin:
Jay
Jay
wb7whi
Member
14 inches from the blade to the left hand post. if you buy it you can store it up here in spokane until you have some room for it down there. be happy to do it.
ngeb528
Member
You might be able to, but I think the price is a little too much. We just bought a 12" for $75, so the 24" should be $150, don't ya think? Or we could sell you ours for half the price yours is listing for. Want to make a deal??
Nancy
Nancy
MesquiteMan
Retired Head Moderator
Roy,
Remember, the size of the saw in inches is the throat or basically the maximum length you can cut to the left of the blade without hitting the frame. It has nothing to do with the resaw capacity.
I have an 18" Rikon and it will not resaw 18". Maybe you already know this and your post was tongue in cheek? If not, now you do!!
marcruby
Member
wdcav1952
Activities Manager Emeritus
So, Roy, are you planning to do a bit of intricate segmenting?
Darley
Member
Nice toy Roy, 5hp whooooooo!! that cool you can cut lots of blanks, but 3 ph that not good for your electricity bill :biggrin:
that not good for your electricity bill :biggrin:
rej19
Member
If that one won't do the job maybe this one will.
http://indianapolis.craigslist.org/tls/1080407923.html
http://indianapolis.craigslist.org/tls/1080407923.html