jashton
Member
I got the idea today of stacking a piece of Red Oak with a stabilixed Corn Cobb. I cross cut them, then reverse glued. I turned the pieces and believe it or not turned out well.
At about 3000 grit micro mesh I used a blue sharpie marker to stain.
I was suprised at the outcome. Has anyone done anything, like this if so .....do you have any hints.
Feed back is welcome and wanted.
At about 3000 grit micro mesh I used a blue sharpie marker to stain.
I was suprised at the outcome. Has anyone done anything, like this if so .....do you have any hints.
Feed back is welcome and wanted.