TexasTaxi
Member
Before I found this forum, and the members that sell mutt blanks here, I bought two of these from woodturnerscatalog.com. The other night, I decided to turn one.
Give me your honest opinions and/or critiques.
I've been struggling with the BLO/CA finish for a few months. I finally figured out how to change my lathe speed, and dropping it down to the lowest (600 rpm I think) helped some. I can apply the thin CA almost perfectly, but every time I try the medium, it makes a big snotty mess and won't cure. Is there a chance that the glue is bad?
This one has about 8 coats of thin, sanded midway through and at the end.
Give me your honest opinions and/or critiques.
I've been struggling with the BLO/CA finish for a few months. I finally figured out how to change my lathe speed, and dropping it down to the lowest (600 rpm I think) helped some. I can apply the thin CA almost perfectly, but every time I try the medium, it makes a big snotty mess and won't cure. Is there a chance that the glue is bad?
This one has about 8 coats of thin, sanded midway through and at the end.