Seer
Member
Well I cut this third ball called a Terminator and what an ideal name for it because it terminated my skews and 2 blades it was so dang hard. I would sharpen my skew and get about 1 inch cut and it wiuld jsut slide on the blank wtf I thought. I looked at the edge and sure enough it had ground a small indentation into it and rounded it over. I bought a new Olsen blade to cut what I thought was acrylic and after 3 inches of cutting the blade stopped cutting so I backed it out and got a piece of pine and it would not cut that either. This studd is like turning metal and I am done with that the other balls turn nicely but this ruined my weekend.
Jerry
Jerry