July meeting date changed

Signed-In Members Don't See This Ad
Magicbob

Magicbob

Member
Joined
Oct 10, 2012
Messages
1,566
Location
Akron, OH
Ok, a number of people could not make the 15th and I just got news I need to be in Philly that day. So, I talked with HH and we will now meet on Saturday July 22

Hope this works out better
 
Signed-In Members Don't See This Ad
Bob Jackson will demo pepper grinders
I will demo our new rotary device for the cheap lasers
everyone bring a nice blank for a swap
 
  • Like
Reactions: Joe
mark james said:
EBorraga said:
Who will be the lucky 6:eek: I'm planning on making the trek, but won't be sure until it gets closer.

Hopefully Mark's hotel is available for booking :biggrin:
Click to expand...

We'll leave the light on, and I'll get some of that quality Georgia Bourbon... (Yes folks, an inside joke)
Click to expand...

I actual have 2 brand new bourbon's that are made here in The Ville I was gonna bring to you. I'm sure your wife would appreciate KY BOURBON :biggrin:. I just need to work out the logistics, but I'm planning on being there. I may end up with one of Bob Jackson's famous Peppermill's!!
 
Marmotjr said:
Magicbob said:
yes, we will be in the mill room
Click to expand...

Maybe this time with it being summer and not during a blizzard, it will be brighter, but last meeting there I had trouble seeing Mark giving his demo. Could we turn on the lights this time?
Click to expand...

Picky, Picky Picky... I was no visual benefit! You may have had your eyes closed :cool:!
 
I think the issue was that the demo was against the overhead door and the light from behind made it difficult to see. I'd suggest the setup be turned around or go side-to-side.
Also, just so everyone is aware. They are widening the road leading to Hartville Hardware. Rt 619 from the hardware west is all tore up. Traffic is being maintained but there will be delays. And that road is always busy anyway, especially when the flea market is open. Approaching from the east is not too bad. There is a back way into the flea market and store but if the flea market is open that is clogged too.
I was thru there this evening and the traffic was light but it is still a mess.
Plan on extra time.
 
Dale Allen said:
I think the issue was that the demo was against the overhead door and the light from behind made it difficult to see. I'd suggest the setup be turned around or go side-to-side.
Also, just so everyone is aware. They are widening the road leading to Hartville Hardware. Rt 619 from the hardware west is all tore up. Traffic is being maintained but there will be delays. And that road is always busy anyway, especially when the flea market is open. Approaching from the east is not too bad. There is a back way into the flea market and store but if the flea market is open that is clogged too.
I was thru there this evening and the traffic was light but it is still a mess.
Plan on extra time.
Click to expand...

I had not heard this. We can certainly make adjustments.
 
m4skinner said:
Dale Allen said:
And roundabouts too...yipee!:frown:

We need another roundabout in ohio like we need another pothole!:cool:
Click to expand...

The problem with roundabouts is people don't know how to drive and read signs.
Click to expand...

+1

(Properly Designed) Roundabouts are dramatically faster and safer than any other type of intersection. It's just that Americans in general don't know how to drive through them. You only have to look for traffic from one direction, and then go if there isn't anybody coming. If you're lucky, you barely have to slow down.
 
Marmotjr said:
mark james said:
Marmotjr said:
Magicbob said:
yes, we will be in the mill room
Click to expand...

Maybe this time with it being summer and not during a blizzard, it will be brighter, but last meeting there I had trouble seeing Mark giving his demo. Could we turn on the lights this time?
Click to expand...

Picky, Picky Picky... I was no visual benefit! You may have had your eyes closed :cool:!
Click to expand...

Are you implying you put your audience to sleep?
Click to expand...

I've been guilty of worse :tongue:
 
And third unrelated, so unmerged, response:

We should also probably require the use of name tags. With both real first name, and online handle. Mark won't be that hard to figure out, he's basically got his driver's license in his header :) . And there's guys like MagicBob who seem to actually be called that. But a guy like me, you won't pick out of the crowd, and it will build the chapter and the forum.
 
Marmotjr said:
And third unrelated, so unmerged, response:

We should also probably require the use of name tags. With both real first name, and online handle. Mark won't be that hard to figure out, he's basically got his driver's license in his header :) . And there's guys like MagicBob who seem to actually be called that. But a guy like me, you won't pick out of the crowd, and it will build the chapter and the forum.
Click to expand...

Wait, I'm much more good looking than my picture...

And I'll bring the stack of name cards that everyone refused to use last time; you must have been sleeping...
 
Marmotjr said:
And third unrelated, so unmerged, response:

We should also probably require the use of name tags. With both real first name, and online handle. Mark won't be that hard to figure out, he's basically got his driver's license in his header :) . And there's guys like MagicBob who seem to actually be called that. But a guy like me, you won't pick out of the crowd, and it will build the chapter and the forum.
Click to expand...

I'll be the Crazy Looking Redneck!! Easy to spot :)
 
Maybe I'm going to have to take my own picture for my Avatar.
I don't use one now because I don't have a recent picture of myself.
Oh I have lots of pictures saved, but they are of everybody else cause I'm always the one with the camera. And no, my drivers license or company badge photo are not what I want to share! :biggrin:
Then maybe I can put it on a badge of some kind.
Hey I know, everybody wear sandwich boards with there name and picture.:rotfl: Maybe not!
 
I'm planing on attending, anyone else from the Dayton area planning on going? Saturday, July 22 correct?
 
Last edited:
Bump.

I will be sending a batch PM to the Ohio Members in a few minutes as an additional reminder.

Let's assemble at 1:00 PM with a meet-and greet, sharing of pens, peppermills, etc; and the demo's to start about 2 PM.
 
well I can't seem to get Mapquest to print
So just plain directions.
Only if you are travelling from the north

From I77 Exit at Exit 118 St Rt 241- turn left
At St Rt 619 turn right
At Cleveland ave turn right
At Lake Center St NW turn left
At King Church Ave NW turn left
Go through the red light into the parking lot
 
Magicbob said:
well I can't seem to get Mapquest to print
So just plain directions.
Only if you are travelling from the north

From I77 Exit at Exit 118 St Rt 241- turn left
At St Rt 619 turn right
At Cleveland ave turn right
At Lake Center St NW turn left
At King Church Ave NW turn left
Go through the red light into the parking lot
Click to expand...

You're screwed if you're coming from the south!!
 
Magicbob said:
well I can't seem to get Mapquest to print
So just plain directions.
Only if you are travelling from the north

From I77 Exit at Exit 118 St Rt 241- turn left
At St Rt 619 turn right
At Cleveland ave turn right
At Lake Center St NW turn left
At King Church Ave NW turn left
Go through the red light into the parking lot
Click to expand...

exit 118 is the way we go traveling from the south.
 
Signed-In Members Don't See This Ad
You must log in or register to reply here.
Back
Top Bottom