RMayoIII
Member
OK so I'm pretty new at this pen turning bit but I've been reading quite a bit of info here. I tried my first CA finish the other day on a zebrawood blank and it came out very nice. About 10 coats of medium (thats all I have) and then used the abralon pads up to 4000 grit. Then I polished it with some Meguiars Mirror Glaze I had in the garage. The finish was very impressive to me so I decided to try again on a piece of cocobolo and I'm not sure what happened.... After 5-6 coats of CA I had to leave the shop for a quick relief break. When I came back the CA had turned very dull and blotchy. I tried to polish it to see if it would go away but it got worse! What is going on here???