Kragax
Member
I did my first CA finish yesterday and it was easier than I thought it would be. Unfortunately I got a minor chipping effect at the bushing, very slight. It looks like another one for my personal collection.
I did my first CA finish yesterday and it was easier than I thought it would be. Unfortunately I got a minor chipping effect at the bushing, very slight. It looks like another one for my personal collection.
.If you don`t need to expand your personal collection , you can always sand the finish off and redo it .
.If you don`t need to expand your personal collection , you can always sand the finish off and redo it .
.
.... or dab on a bit of CA over the chipped area and then gently sand that down and repolish the area. I have been successful doing that.
Finishing it between centers is (to me anyway) the best way to go. I had chips once in a while at first so I know how annoying that can be, and to sand the finish off and start over, well let's just say, that wasn't what I really wanted to do.best bet is to take it off the bushings before adding the finish. I take mine off the bushings and put the blank between centers for both sanding and finishing. Any finish on the centers is easily removed. If the first coat or two is thin CA it will soak into the end grain effectively sealing if from moisture and a few light swipes of the ends on some 600 grit sandpaper on a flat surface quickly removes any inconsistencies on the end.
I did my first CA finish yesterday and it was easier than I thought it would be. Unfortunately I got a minor chipping effect at the bushing, very slight. It looks like another one for my personal collection.
I did my first CA finish yesterday and it was easier than I thought it would be. Unfortunately I got a minor chipping effect at the bushing, very slight. It looks like another one for my personal collection.
I use allot of wax paper, it is so much easier then then anything else I have tried.
Allot of paper products use wax on it. the brown paper bags from the grocery store.
paper milk cartons butchers paper or meat wrapping paper.
Paper straws . the boxes that candies come in and even the coatings on allot of candies is some sort of natural wax ( paraffin, bees , and carnauba are the 3 known natural waxes )
We eat allot of carnauba wax on candies and food
My point is there is almost always something in the house or garage or trash can that can be used to stop the finish from sticking to something you don't want it to stick to and stop the finish from chipping on the ends when you remove the bushings or sanding mandrels ..........
I did my first CA finish yesterday and it was easier than I thought it would be. Unfortunately I got a minor chipping effect at the bushing, very slight. It looks like another one for my personal collection.
I use allot of wax paper, it is so much easier then then anything else I have tried.
Allot of paper products use wax on it. the brown paper bags from the grocery store.
paper milk cartons butchers paper or meat wrapping paper.
Paper straws . the boxes that candies come in and even the coatings on allot of candies is some sort of natural wax ( paraffin, bees , and carnauba are the 3 known natural waxes )
We eat allot of carnauba wax on candies and food
My point is there is almost always something in the house or garage or trash can that can be used to stop the finish from sticking to something you don't want it to stick to and stop the finish from chipping on the ends when you remove the bushings or sanding mandrels ..........
Interesting - Do you punch a hole in a small piece and slip it over the bushing, insert in tube and tear off excess?
I made my own tapered non stick bushings out of a piece of Delrin rod. I drill a 1/4" hole in the Delrin, and then turn it on the lathe to the profile I like. After turning, before finishing I switch out the metal bushings for the plastic ones. Nothing sticks to Delrin, making it easy to pop the blank off without damaging the finish and then sanding excess off.