jd99
Member
I was going to make some finishing bushings this afternoon, and this is what I came up with. Figured I'd make them out of delrin and they should be a universal type to be able to work with all the kits (unless there are kits out there with tubes bigger then 1/2")
Figured one center (double angle) and two end (single angle) bushings would be all I would need.
Any one got any suggestions or comments please fell free to let me know.
Figured one center (double angle) and two end (single angle) bushings would be all I would need.
Any one got any suggestions or comments please fell free to let me know.