johncrane
Member
I use a small steel vice for drilling 5/8 blanks it works ok then when I got into the bigger kits and bigger drills it didnt work so I turned the 'base plate' of the drill up. at ninety degrees and bolted the vice to it and use a set square to square everythink
up .you can slide it up or down,when clearing the drill bit p.s use bolts the same size as the holes in the base good luck.FROM JC DOWN UNDER.
up .you can slide it up or down,when clearing the drill bit p.s use bolts the same size as the holes in the base good luck.FROM JC DOWN UNDER.