Cocobolo bowl.

Signed-In Members Don't See This Ad
See more from Rcd567

Rcd567

Member
Joined
Sep 22, 2007
Messages
240
Location
Glenwood, Iowa, USA.
Long story. I started this bowl last April with every intention of finishing it last spring. As it turned out, I had roughed it out, walls of about 3/8" thick. Just needed some final shaving and inside work...until my Dad got critically sick. He was in OK shape for a 79 year old. Previous open heart, triple by with a major valve job. Anyway, May, June, July in a hospital, then August in a nursing home. Mom's been gone a couple years from lung cancer. If you smoke...stop. Trust me, it's a horrific way to die. Anyway, got him back home first part of Sept. Spent the rest of that month and all of October playing catch up around here. My vacation started last Friday. I went and picked up the bowl only to find it warped. With a lot of patience and luck, I finally got this.

cocobowl.jpg


It has some light wood in it, the stuff towards the outside of the tree. Guess that's why I got it so cheap. None-the-less, my wife's happy with it.
 
Signed-In Members Don't See This Ad
Well...actually the finish is just a simple spar urethane. I sanded thru 400, then micro meshed through half my scale. Then three coats of urethane with steel wool inbetween. My wife likes her stuff shiney, and this type of varnish is easily removed.

Thanks for the nice comments.
 
Nice job. You said you got it cheap. My first thought was just expensive a hunk of Coco that size would be.
However, it is overfinished, IMHO. Unfinished Coco look great all by itself.
I can't decide if the sapwood adds or detracts, would have to see in person.
 
Thanks for all the comments. I got the piece off ebay, I can't remember exactly what I paid, somewhere in the twenties, plus ten dollars shipping. I have another one I paid forty for, but has very little sapwood. The sapwood in the front of the picture, doesn't go all the way through. Obviously the sapwood towards the back does, that's how you are able to see it.

There is a wood shop about 50 miles from here and they have some cocobolo. A chunk this size is about $130. I bid on a lot of blanks on ebay, but win very few. I'm in the learning process and will decide on a size and start bidding on those pieces. I'll usually try for the "sub standard" pieces as I have a better chance of winning it. If I screw it up, I use the curly chips as kindling in my fire place. :)
 
Back
Top Bottom