CAn any one post the digital measurements of the Atrax bushings. thanks
A avbill Member Joined Oct 18, 2007 Messages 1,973 Location San Bruno, CA, USA. Sep 23, 2012 #1 CAn any one post the digital measurements of the Atrax bushings. thanks
Monty Group Buy Coordinator Joined Mar 4, 2005 Messages 8,360 Location Pearland, Texas, USA. Sep 23, 2012 #2 Why not just measure the Atrax at the fittings?
A avbill Member Joined Oct 18, 2007 Messages 1,973 Location San Bruno, CA, USA. Sep 23, 2012 #3 I do not have the kit in hand.
Ed McDonnell Member Joined Oct 20, 2008 Messages 2,294 Location Melbourne, FL Sep 23, 2012 #4 What I measured on the Atrax components: Cap both ends = .568" Barrel Nib End = .511" Barrel Finial End = .478" Don't use stock bushings so I can't measure those for you. Hope this helps. Ed
What I measured on the Atrax components: Cap both ends = .568" Barrel Nib End = .511" Barrel Finial End = .478" Don't use stock bushings so I can't measure those for you. Hope this helps. Ed
Andrew_K99 Member Joined Feb 17, 2011 Messages 1,571 Location Waterdown, ON, Canada Sep 23, 2012 #5 The atrax is the same as the Jr pens (gent/statesman/retro) As per the chart in the library: Cap diameter is 0.567, both ends and 0.460 for the tube. Body is 0.512 and 0.480 and 0.380 for the tube. http://content.penturners.org/library/general_reference/bushingsandtubes.pdf (bottom of page 9) AK
The atrax is the same as the Jr pens (gent/statesman/retro) As per the chart in the library: Cap diameter is 0.567, both ends and 0.460 for the tube. Body is 0.512 and 0.480 and 0.380 for the tube. http://content.penturners.org/library/general_reference/bushingsandtubes.pdf (bottom of page 9) AK