warthog
Member
Can a person put the three buffing wheels through the washing machine?
Can a person put the three buffing wheels through the washing machine?
Hi Ken; I trust you're not considering putting the Beall wheels that you purchased from me through the washing machine. There would be no need to do that. They were gently loaded with the buffing compounds as required to allow them to buff efficiently!Can a person put the three buffing wheels through the washing machine?
Hi again Ken; Clean them with the hacksaw blade or a wire brush, then take a piece of pine or the like 2 x 4 etc. and buff that. See if any of the colour is left on the pine piece!The reason I was wanting to wash the wheels was because I was running the buffer and while it was running it was rubbing acrfoss the piece that holds the tool rest and turned the first wheel red. The second reason was because I was buffing out a PR blank that had quite a bit of blue in it and turned that wheel blue. Just didn't want to take a chance and have it rub off onto something that I would want to keep.
Thanks a bunch Mack...I would never had thought of that in a million years.
That wasn't in the Beall 3 wheel buffer when I purchased it. It came with the recommendation of breaking the wheels in by backing a piece of 80 grit sandpaper with a board and pressing it against the spinning buff.:biggrin:how come you didn't get the renewer brush from Mack,