I don't have one and although LOML wanted to give me one, I have too many specialty tools that get too little use.
That said - There may be a reason it is hard to cut. The wrong blades can wreak havoc on cutting. I mistakenly picked up some "DOWN-CUT blades to use on a new jigsaw 4 - 5 years ago and it caused the wood and jig saw to bounce and bounce. I had to press HARD to do any cutting with that jigsaw. Getting ready to give the saw away, and cleaning it, I noticed that it had the Down Cut blades versus normal UP-Cut blades. It is very easy to pick up the wrong blades at HD or Lowes.
Look at this picture - The 4th blade from the left is a LAMINATE blade and it looks the same as the others Except the Direction of the Teeth:
HomeDepot has laminate blades right beside the other blades and it is easy to pick up the wrong ones. The direction of the teeth make all the difference in the world, and so do the right blade for the cut.
I am not defending BladeRunner and don't care for it, but I do know that the wrong blade for the cut can make even a Bosch seem like a piece of junk if one is not aware of it.