maxman400
Member
After seeing "wiset1" "started but never finished" thread the other day, it inspired me to try this. I learned a lot from this one blank. The blank is made up with black walnut, purple acrylic, black paper and aluminum beer bottle. All the parts were cut using a razor saw, (learning part) need better equipment. Drilling was pretty straight forward, I used the cullet chuck and started with a center bit then a 3/8 bit and finished with the 27/64. All joints have a layer of black paper between them including the diamond shapes and there is a layer on each side of the aluminum pieces, CA was used for the glue up.
Comments are welcome, And Thanks for Looking.:biggrin:
Comments are welcome, And Thanks for Looking.:biggrin: