mmayo
Member
This blank has lived in my Jr. something bin as other blanks passed it by. Today I took a patience pill and four Motrin and got to work. I used a 2" radius carbide cutter on an angle from start to finish. After the cap was turned I rotated the cutter so I had another sharp surface. Though it may not show, the Simstone is smooth and very glossy. I just buffed and polished the sanded blank.
I guess those other six Simstone blanks in storage will get their chance at the lathe.
I guess those other six Simstone blanks in storage will get their chance at the lathe.
Attachments
Last edited: